SY Pneumatic Industrial Co.
No.35, Yongyi 8th St., Taiping Dist., Taichung Hsien
Taiwan

Home

Our Products

Specification: 1. Exhaust System: Front 2. Suction Power:85-90kg 3. Slide Hammer Weight:3.5lb 4. Air Inlet:1/4" 5. Air Pressure:6kg/cm2 6. Air Consumption:240L/min 7. &nbs ...

Angle Drill 90 degree - SM215

Description: The right-angle drill is primarily designed to fit into tight spaces that a regular drill could not be applied. The angle allows for a smaller head and shorter extension of the handle, so that corners can be drilled from the inside. This is also true of any space that is not long enough to handle a traditional drill. Specification: 1. Free Speed:3000 rpm 2. Air Inlet:1/ ...

Belt Sander - SM601

Description: 60mmx260mm Miniaturized, lightweight and 1.3 kgs only. Handle angle can adjusting range reach 180. Adjustable guide shaft. Handle rear can be connected with muffle tube and protect work piece surface will not be oil pollution. Suitable for Wooden furniture, plastics, glass, metalwork, desk, chair, bed and cell Phone Housing, etc. From grind to the surface polishing all can application. Rid of surface scar and deckle edge. Stainless steel surface tiny mark processed. Specifica ...

Pneumatic Water Sander - SM209

Rubber sleeve keeps hands from getting cold or slip Don’t use polishing pads bigger than 125 mm (5"). There is easy to cause damage to the tool. Front thumb-adjustable water knob enhances the tool control. No visible water tube and screw make a seamless smooth touch and no more break risk when dropping. Cast from aircraft aluminum. The watertight sealed bearings provide long life and smooth rotational speeds. The water and air controls are simple to use and conveniently located. Rear air vent ...

Pneumatic Flux Chipper - SM04A

Description: Flux Chipper it’s powerful for exerting and chisel is suitable to dismantle. It’s was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside. Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 ...

Air File and Air Saw - SM205

Description: There is omnipotent hold fast. It’s easy to clip firmly in various of thickness on process tools of plane surface. It can purge hardened surface of metal that made from discharge electricity quickly. Long life, high speed, light weight and trouble free. to the processing of footwear, mold and woodworking industries Specification: 1. Strokes Per Minute:3400 spm 2. File ...

Pneumatic Needle Scaler - SM04

Description: Needle Scaler powerful for exerting and chisel is suitable to dismantle. It’s was designed specially to use for a long time. And suitable for boat, machine and large instrument to clear off the rust and adhesion underside. Specification: 1. Blow Per Minute:3000 b/min 2. Air Inlet:1/4" 3. Air Pressure:6kg/cm2 4. ...

Air Polisher 3 Inch - SM03A

Description: The 3” PAD supply various of sponge and wool-wheel for partial. Small volume, light weight, low noise. It’s suitable for the small area to smooth. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking. Specification: 1. Free Speed:2500 rpm 2. Air Inlet:1/4" 3. &nbs ...

High Speed Air Grinder - SM03

Description: There are 2” or 3” kinds of PAD it’s useful for aperture smooth and grind. Long life, high speed. Light weight and trouble free. A durable yet economical choice offering longer life and higher speed to be suitable for process in vehicle body shop, mold and woodworking. Specification: 1. Free Speed:15000 rpm 2. Air Inlet: 1/4" 3. ...

Air Finger Sander - SM01N

Description: A lot of appurtenances to supply the various of sandpaper and burnishes for process. It was designed specially to use for a long time. Volume is small, the weight is light and the rotational speed is fast. There are three kind orbital diameter can choose. (0.75mm, 1.5mm, 3mm) It’s suitable for burnishes that cannot grind the detailed polish and useful for process in difficult reach area, mold and woodworking. Specification: 1. ...

Video Gallery

Our Activities

S.Y. is a professional manufacturing and exporting company with a history of more than 30 years in the field of pneumatic tools including air sander, air grinder, air polisher, needle scaler, flux chipper, air file, air saw, pneumatic water sander, pneumatic angle drill, etc.

Product Categories