Bullet Proof Vehicle Toyota

Specifications of Armor & Vehicle Alterations:

Ballistic Specification:

B6 level are armoured using materials, both opaque and transparent, that meet or exceed the requirements of the European CEN 1522/23 and CEN 1063 standards to the level FB6 for opaque areas and BR6 for transparentareas.

Armoring:

All four sides of the passenger compartment and the roof of the vehicle are protected using high-quality armour steel and glass defeating 7.62x51mm M80 Nato Ball ammunition (U.S. NIJ level III, CEN level FB6/BR6) and 5.56x45 SS109 ammunition (CEN level FB5/BR5 and FB6/BR6) at 0° incidence (90° to the surface) and 10m range according to CEN1063 and CEN1522.

Opaque Areas:

All opaque areas including the roof are protected with 6.5 mm ballistic steel against the following and all lesser weapons/ ammunitions at 90° impact angle in accordance with the above specifications.

Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov

Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt

Calibre 7.62 x 51 mm, FJ/PB/SC, (FN) “FAL” / “LAR” NATO rifle

Transparent Areas:

All transparent areas are multi-layer and polycarbonate coated of thickness 41 mm to protect against the following and all lesser weapons/ ammunitions at 90° impact angle in accordance with the above specifications.

Calibre 7.62 x 39 mm, FJ/PB/FeC, AK 47 Kalashnikov

Calibre 5.56 x 45 mm, FJ/PB/SCP, M16 Colt

Calibre 7.62 x 51 mm, FJ/PB/SC, (FN) “FAL” / “LAR” NATO rifle

Floor:

The floor of the vehicle is designed to defeat the following hand grenades

Two DM 51 (German Norm) detonated simultaneously

In addition, the floor also offers protection against anti-personnel mines.

Armouring design:

• The armouring is integrated inside the vehicle’s cab and forms a complete self- supporting structure so as to avoid excessive stress on the vehicle’s original structure.

• The interior armour-frame provides overlap for the large-surface armour components such as the door armour-plates and the windows.

• Hinge mounting points are reinforced both in the pillars and in the doors in a way that the armouring of the door is supported by the armouring of the pillar.

• Heavy-duty hinges with in-built door-stop.

• Fuel-tank(s) protected with steel armour-plates.

• The battery and control module of the engine are protected to the same level as the opaque areas.

Note: vehicle for reference purpose only

Test Reports/ Product Liability:

All materials used in the production of the cabin were successfully tested against projectiles  and explosives by independent laboratories. Test reports can be presented upon request or during a factory visit. The armouring of the vehicle provides protection against a wide range of projectiles and explosives. However, complete protection is not possible for reasons of design and modern military weapon technology.

Additional equipment included:

ECM and battery protection

Fuel-tank protection

Upgraded suspension to cope with the additional weight due to armouring

Run-flat systems on all 5 wheels

Further optional equipment available at extra cost, such as;

• Operable front door windows

• Ballistic radiator protection

• Full engine sides protection

• Brake upgrade – stage 1

• Brake upgrade – stage 2 (slotted discs + braided hoses + HD callipers and pads)

• Brake upgrade – stage 3 (big discs, 6-piston callipers front, 4-piston callipers rear and pads)

• Suspension upgrade – stage 2 (HD antiroll bars)

• Suspension upgrade – stage 3 (high performance springs and dampers for high-speed driving)

• Gun-ports

• 2-way intercom

• Front and rear strobe-lights

• Police siren/Public address system

• Bull-bar

• Radio Communication - Codan NGT VR

• Thuraya SG-2520 kit

• Video recording (basic kit)

• Video recording/surveillance equipment

• Gun-ports (two, rear door window, concealed)

• Under-belly blast-shield

• others

Available upon request on new production order. Please let us know your specific requirements

Warranty & After Sales Service:

The entire vehicle carries a one year warranty on all components not including lubricants and parts which are subject to normal wear and tear, provided the vehicle is serviced according to the maintenance schedule in our approved workshop. In the event of a problem occurring that cannot be resolved by local technicians, a member of our service team will be available to assist or travel to the location of the vehicle to carry out the repair. Services under the warranty will be provided free of charge to the customer upon immediate written notification by either the authorized Toyota dealer or the vehicle owner. It is left to our discretion to replace or repair parts that have become unusable as a result of proven defects in design, material or workmanship. Replaced parts become our property.