offers Raised Floor Systems, having impressive in-built properties and truly
state-of-the-art technology. It is the ideal product for any field of
Types of Panel:
CONGLOMERATE PANEL (Chip wood) - It's constituted by a core of high density chipboard and
resins; its size is mm.600x600 available in the mm.38 standard thickness and,
on request, mm.28 thickness (only for structure with stringers); it's parametrically
protected by self-extinguishing PVC.)
CONGLOMERATE PANEL - It's constituted by a monolithic core of incombustible calcium
sulfate, class 0 (A1 about DIN4102), REI 90/RE 120 certificated. Its size is mm.600x600
available in the mm34 or mm.28 standard thickness (on request between mm.20andmm.36).
It’s very high density (1500 kg/m3) permits to obtain the highest performances of
acoustic comfort, in deformability and safety in case of fire.
PANEL FOR NATURAL STONE COVERING - It's
constituted by incombustible calcium sulfate mm.600x600x13
reinforced by galvanized steel box or sheet mm.0,5 thickness on bottom side.This
panel is utilized in very high class environments where natural stones
coverings are required .
Sulphate (gypsum): This is a non-combustible material with superlative
structural and physical properties, & offers outstanding levels of
perfection of finished panel.
matching of the joint-lines without continuity solution.
function structure that satisfies the almost totality of requests. The several
kinds of “U” stringers, to be fixed with snap-on system, allow to obtain
several load bearing capacities in function of specific requests. Where
necessary a supplementary fixing of stringers by screws is possible
structure that requires the fixing of the bases to the slab; it’s particularly
suggested for very low height as in case of restoration, where
the recovery of s t r i n g e r s encumbrance is determent.