Ford Super Duty (F350/450/550) Ambulance
Standard Vehicle Specification
6.2L V8 (standard on F-350)
6 Cylinder, 28 gallons (F-350 SRW w/68D Payload Downgrade Pkg.)
Max Power 385 @ 5500 rpm
Torque 405 @ 4500 rp
TorqShift® 5-Speed SelectShift™ Automatic (standard with 6.8L V10)
Rack & Pinion
Suspension & Brake System:
Front Coil Spring; Rear HD Leaf Spring
Ventilated Disc/Disc with LSV
Steel Wheel Rims with 195R15 tires.
Super Long Wheel Base of 2570 mm
Fuel Lid Openers.
Front Fog and Driving Lamps.
Ambulance Light Bar on top.
Dual Air Conditioning – Front Driver, Patient Area.
AM/FM Radio, with Speakers.
Driver & Passenger Airbags.
Rear Cooler & Heater.
Roof Mounted Ventilation
Illuminated Entry System & Scuff Plates.
Power Door Locking
Standard Ambulance Specification.
Cabinet structure: Aluminum hallow tube frames construction.
Cladding: 2mm overall Aluminum Sheets, Aluminum sheets will be made in one piece for each side in order to increase the rigidity of the box. Aluminum sheets will be reinforced with a steel frame for long-term durability.
Walls: Rigid injected CFC free polyurethane foam (50mm Thickness).
Fire Rating: Meets flame retardancy requirements according to DIN 4102 class B3 and according to ASTM D 1692 and ISO 3582 test (self-extinguishing foam). Total panel B2 classified.
Painting: 2 coats of NC Primer and 3 coats of 2k paint (white color).
Overall Box dimension: 4100×2878×2420 (L×W×H) mm.
Interior cabin dimension: 3940×1930×1400 (L×W×H) mm.
Rear side door: Double swing door with flush mounted windows.
Right side door: Single swing door with flush mounted window.
Red Crescent marks: 4 no’s the Red Crescent marks will be provided at all the four sides.Reverse “AMBULANCE” letters in English & Arabic on the front bonnet.“AMBULANCE” letters in English and Arabic at rear.
Foldable step: 20×130 cm foldable isolated steel rear step provided.
Electrical & Lighting:
Marine grade switch panel board for all lighting and equipment controls.
Inverter 220V output will be provided to compensate the power consumed in the loads.
Additional 12V battery will be provided for the medical cabin.
2× 12V outlet and 3× 220V power outlet provided at the necessary recommended places.
220V AC shoreline provided with electric cable (10m).
8× LED lights on the cabinet ceiling. 4 in a row at the left and right side of the cabinet.
Separate AC evaporator unit provided in the rear side of the patient compartment with temperature control.
Patient Compartment Construction:
Medical cabinet:Medical cabinet made from PVC Sheets on the LHS, with shelves with sliding doors. Storage for spinal board will be provided at the rear of the cabinet towards the rear door. Special cabinet for two oxygen cylinders with sliding window will be provided.
Squad bench: (for paramedics) Behind Doctor Seat with backrest covered with easy to clean washable vinyl upholstery and is suitable to accommodate two (2) persons complete with 3 points retractable seatbelts for each.
IV Hooks: Four (4) Roofs suspended IV holders will be mounted in the patient compartment ceiling.
Technician/Doctor seat: Revolving 360 degrees.
Floor: Marine grade plywood covered with extra heavy duty anti slip washable vinyl sheet.
Partition: Front & rear compartments are separated with PVC sheet partition (bulkhead) with sliding communication window between driver & patient compartment.
Windows: Covered by frosty effect sticker to provide privacy in the patient compartment.