SHEETS & PLATES

Parasmani Engineers (India) is a dynamic group, which was established over a decade ago to cater to growing demands of Sheets & Plates standards in all materials like Stainless Steel , Carbon Steel & High Nickel Alloys. We Manufacture, Export and Supply these Sheets and Plates which meets with national and international quality standards and producing base which owns equipments conforming to international technical level and is well equipped with a whole set of advanced plasma refining equipments.

Stainless steel plate is often referred to as "corrosion-resistant steel" – it does not stain, corrode or rust as easily as normal carbon steel. It would however be misleading to say it is corrosion-proof. It differs significantly from standard carbon steel due to the amount of chromium present, which limits surface corrosion unlike carbon steel which will rust when exposed to air and any moisture in the atmosphere. Due to its anti-oxidation qualities, stainless steel is often a popular solution. Sheets & Plates Specifications

RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.

FORM: Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate.

Stainless Steel

ASTM / ASME SA 240 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 317L , 321 , 321H , 347 , 347 H , 409 , 410 , 410S , 430

Duplex Steel

ASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760. 

RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.

FORM: Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate.

Carbon Steel

ASTM / ASME A 516 / 517 GR. 60 / 70 , IS 2062 , IS 2002

Alloy Steel

ASTM / ASME A 387 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91.

RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.

FORM: Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate.

Nickel Alloy

ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )ASTM / ASME SB 127UNS 4400 (MONEL 400 )ASTM / ASME SB 424 UNS 8825 (INCONEL 825)ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )ASTM / ASME SB 443 UNS 6625 (INCONEL 625)ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 )