safety equipments & cloathing - MICROPOROUS DISPOSABLE

Key Features:

• Type: Microporous Disposable Coverall

• Fabric Weight: 60 GSM (Grams per Square Meter)

• Available Sizes: Small (S) to 5XL

Appearance 

• The coverall is white in color.

• It is a one-piece, full-body garment designed for comprehensive protection.

• Features an integrated hood for head and neck coverage.

• Equipped with a front zipper closure, likely extending from the crotch to the chin, for easy donning and doffing. This zipper is typically covered by a storm flap to enhance the barrier.

• The suit likely incorporates elasticated wrists, ankles, and hood opening (standard for this type of coverall) to ensure a snug fit and minimize the ingress of particles and liquids.

• The model is depicted wearing safety glasses/goggles and dark work gloves, which are common complementary personal protective equipment (PPE) used with such coveralls.

Intended Use & Characteristics:

• Microporous Disposable: This is a significant feature. Microporous material is typically a laminate of a film layer over a non-woven substrate. The film has microscopic pores that are small enough to prevent the passage of liquid droplets and dry particulates but large enough to allow moisture vapor (sweat) to escape, providing breathability and comfort. This makes it suitable for environments requiring both liquid splash protection and breathability.

• Fabric Weight (60 GSM): At 60 GSM, this coverall is a robust option among disposable garments. The higher fabric weight, combined with the microporous construction, suggests enhanced durability, tear resistance, and superior barrier performance against liquids and fine particulates compared to lighter, non-microporous disposable coveralls.

• Applications: Due to its microporous nature and higher GSM, this coverall is suitable for a wider range of applications where protection against both dry particles and liquid splashes is critical, including:

  • Industrial cleaning and maintenance (where light chemical splashes may occur)

  • Paint spraying and finishing

  • Pharmaceutical handling (non-sterile environments)

  • General industrial applications

  • Controlled environments (e.g., cleanrooms where particulate control is important, but not necessarily medical grade)

  • Asbestos abatement (Type 5/6 applications, depending on specific certifications)