RITVER ROAD MARKING PAINTS

Ritver manufactures several road marking paints, specifically designed for use on asphalt roads, pavements, and runways. Their solvent-based acrylic formulas are fast-drying and offer resistance to gasoline, oil, and water. Some products can also be enhanced with glass beads for added reflectivity. Ritver road marking paint products

• Ritver Acrylic Road Marking (White/Black/Yellow): This fast-drying paint is made with a thermoplastic resin and lightfast pigments for excellent resistance to fuels, oil, and water. It is suitable for asphalt, concrete, and runways.
• Ritver Acrylic Road Marking Reflective (White/Black/Yellow): This is a version of the standard acrylic road marking paint that includes reflective properties, ideal for enhancing visibility and safety. Reflectivity can be further increased by adding glass beads during application.
• Ritver Airfield Road Marking (Red/Yellow/Black): This is a solvent-borne paint based on a special synthetic resin, specifically designed for airfields and runways. It has excellent adhesion and is highly resistant to mechanical wear, impact, and aviation fuels. 

Where to buy Ritver paints in DubaiIn the UAE, you can find Ritver products from various distributors. You can contact them or visit their websites to inquire about specific road marking paints: 

• Al Fakhar Hardware Trading LLC
• Johns Paints Trading LLC
• Al Meena Building Materials Trading LLC
• Ritver Paints & Coatings (directly, with offices in Dubai and Abu Dhabi) 

Application guidanceFor the best results with Ritver's road marking paints, always follow the manufacturer's specific instructions. 

• Surface preparation: Ensure the surface is clean, dry, and free of contaminants like oil, grease, or dust. For concrete, a light wire brushing can remove loose particles.
• Application: The paint can be applied by conventional spray, airless spray, or a roller for smaller areas.
• Glass beads: For reflective markings, glass beads can be mixed into the paint or dropped onto the wet surface.
• Avoid high humidity: The paint should be applied in dry, cool conditions and when the surface temperature is at least 3°C above the dew point to prevent condensation.