Welcome to Dubai Yellow Pages Online
Dubai Yellow Pages Online DUBAI YELLOW PAGES ONLINE
Global Site for local Search
Get it on Google Play

Baoding Ningxin New Material Co., Ltd.

Products / Services : Aluminium filtration fiberglass mesh filter
Ningxin Fiberglass mesh filter for molten aluminium filtration are specially designed and woven for the diffusion and filtration of aluminium.High twisted yarns are used to control strand diameters and resist flattening or distortion under pressure from contact with molten metal. The integrity of the weave pattern is maintained by the use of phenolic resin, and by the use of leno construction in high density. The production facility is ISO 9001 approved and tests are run on each batch for loss on ignition, rigidity, and hole size.
FEATURES & BENEFITS
1.Brings down the casting rejection rate due to slag inclusions to less than 3%.
2.Cheap and cost effective,easy installation.
3.Compared to galvanized metal mesh, it will not change molten metal composition.
4.Stay away from molten aluminium and easy to handle the aluminum scrap recycling (Fibeglass mesh can float on top of the molten metal when the metal is recycled and can be scooped out), this can greatly reduce cost.               
5.Reduces molten metal turbulence,improves molten metal distribution and flow.                
6.Produces minimal odor and smoke.
7.Remove oxides and inclusions to improve castings mechanical properties and surface finish.
8.Excellent stiffness and toughness,good impact resistance.
9.Mesh and grid is well organized and highly integrity
MAIN APPLICATION:
Automobile or motorcycle wheel rims,aluminum cylinder,aluminium pistons,rods,ingots,aluminum and alloy precision castings.
SPECIFICATIONS:
Density:300g/m2
Mesh size:0.8-2.5mm
Porosity:55%
SiO2:above 58%
Thickness:0.35mm
Application:Aluminium and alloy casting
Working Temperature:700-850 Degree C
Soft Point:900 Degree C
Continuous Working Time:below 10 minutes
Tensile Strength (N/4ends):above 6
Weave type:Leno or plain
Gas emit(cm3/g):below 30
PACKING:
1.Standard pre-cut sheet size: 300150mm.Other sizes and shapes are available upon request.
2.The Max.width can be 100mm and length 50meters or 120meters in roll with resin coating or without coating.
3.There are many special treated shapes like cap or hat,tubular,funnel etc..as per different application.      
Contact :  James Wang
Address :  Baqie Industrial Zone,Baoding city,Hebei Provinc
China
Tel No :  86 3128925702
Fax No :  86 3128925702
More Companies in Similar Category